Code Finder

Find the product codes you need by filtering from our whole product range.

Find Codes
Code Finder

BJ20

Updating Product Data...

Photometric configuration only available on screens above 1024px

Linealuce - 37 surface Remote - 48V dc with DMX512-RDM control - L=511mm - Wall Grazing Optic - 12.9W 525.1lm

Product Information

  • Material: extruded aluminium
  • Size (mm): 512x91x39, Weight (kg): 1.47
  • Design: Jean-Michel Wilmotte

Available colours

Lighting parameters

Electrical parameters

  • Dimmable Electronic Control gear not included
  • Control: DMX-RDM
  • Ballast losses [W]: 2.9
  • N° lamps assembly: 1
  • Operating ambient temperature range: da -30°C a 50°C.
  • Power Factor: See installation instructions
  • LED Current [mA]: 0.3

Technical Specifications

Installation information

  • Installation: The following accessories are available for installation: adjustable wall-mounted arms in AISI304 stainless steel (L=115mm code BZQ9, 200mm code BZJ9) and a plate for surface- or ceiling-mounting made of anodised aluminium (BZJ6).
  • Environment: indoor/outdoor
  • Wiring: The product is equipped with a nickel-plated brass PG13.5 double cable gland with H07RN-F rubber outlet cables 5x1.5mm2 for pass-through wiring: each cable is set up both for the DMX-RDM signal and for 48V dc power supply. Available for electrical connection: IP68 5-pin linear connector (BZS6), cap for IP68 connectors + 120 Ohm terminating resistor (BZQ7), 48V dc DIN bar electronic ballasts to be ordered separately: 120W (BZ14), 240W (BZ15) and 480W (BZ16). DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (code BZQ7)
Accessories (9)
  • BZJ6

    Plat for application on support or on ceiling - L=290 - For L=512-528-1004-1040-1056
    Size (mm): 290
    • 00 Indeterminate
  • BZJ8

    Adjustable arms +/- 90° in stainless steel for wall or ceiling mounting - L=200
    • 13 Steel
  • BZQ9

    Adjustable arms +/- 90° in stainless steel for wall or ceiling mounting - L=115 for monochromatic dimmable LED and RGB
    • 13 Steel
  • PC12

    Constant voltage power supply unit non dimmable track DIN 120W - VIN = 88-264VAC 47/63Hz Vout = 48V-55V IMAX = 2,5A dimensions: 40x114x125
    Size (mm): 114x40x125
    • 00 Indeterminate
  • PC13

    Constant voltage power supply unit non dimmable track DIN 240W - VIN = 88-264VAC 47/63Hz Vout = 48V-55V IMAX = 5A dimensions: 63x114x125
    Size (mm): 114x63x125
    • 00 Indeterminate
  • PC14

    Constant voltage power supply unit non dimmable track DIN 480W - VIN = 90-264VAC 47/63Hz Vout = 48V-55V IMAX = 10A dimensions: 85x128x125
    Size (mm): 114x86x125
    • 00 Indeterminate
  • BZN7

    Y connector with 5 poles IP68 - For the connection of the DMX or DALI signal cable and power supply cable
    • 00 Indeterminate
  • BZQ7

    End cap for connectors + 120 ohm thermal resistance
    • 00 Indeterminate
  • BZS6

    IP68 connector 5-pole
    • 04 Black