Code Finder

Find the product codes you need by filtering from our whole product range.

Find Codes
Code Finder

BN32

Updating Product Data...

Photometric configuration only available on screens above 1024px
Attention! Code no longer in production. Please use the Code Finder to find the alternative that best suits your needs.

Linear Recessed LED - Electronic control gear 220-240V ac - DMX512-RDM control - L=1071 mm - Wall Grazing Optic - 33.9W 970.9lm

Product Information

  • Material: extruded aluminium
  • Size (mm): 1071x101x117, Weight (kg): 3.60

Available colours

Lighting parameters

Electrical parameters

  • Dimmable Electronic Control gear included
  • Control: DMX-RDM
  • Ballast losses [W]: 5.4
  • N° lamps assembly: 1
  • Operating ambient temperature range: da -30°C a 50°C.

Technical Specifications

Installation information

  • Installation: Ground- and wall-recessed using the outer casing, to be ordered separately. For ground installation a drainage channel must be created or gravel inserted for drainage under the outer casing before installation, to guarantee the degree of protection stated. For ceiling-mounting with plasterboard panels (1-30 mm thick), make the preparation openings as indicated in the instructions sheet and use the accessory with code 5926 (kit containing steel cables with reinforcement plates).
  • Environment: indoor/outdoor
  • Wiring: Equipped with electronic control gear with DMX512-RDM control, 220-240V ac, 50/60Hz contained in the luminaire. For electrical connection the product has a lower box with a nickel-plated brass PG11 double cable gland with H07RN-F rubber outgoing cables for pass-through wiring: each cable is set up both for the DMX512-RDM signal and for 220-240V ac power supply. Available for electrical connection: IP68 5-pin linear connector (BZS6), cap for IP68 connectors (BZQ7), IP68 5-pin 3-way (Y-type) linear connector (BZN7). DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (code BZQ7)
Accessories (6)
  • 5925

    Steel cable L=250 for application on wall
    • 00 Indeterminate
  • 5926

    Kit with steel cables with small reinforcement plates for application on false ceiling - L=600
    • 00 Indeterminate
  • BZV4

    Casing - L=911
    • 00 Indeterminate
  • BZN7

    Y connector with 5 poles IP68 - For the connection of the DMX or DALI signal cable and power supply cable
    • 00 Indeterminate
  • BZQ7

    End cap for connectors + 120 ohm thermal resistance
    • 00 Indeterminate
  • BZS6

    IP68 connector 5-pole
    • 04 Black