[ new products ]
Cut-Off system LED
design iGuzzini
• Direct lighting fixture for LED’s with road optic.• The fixture can be installed on a pole or wall-mounted.
• Made up of optical assembly, pole, arm (single or double) and pole-top.
• Optical assembly and lid made of die-cast aluminium, with parallelepiped (Delphi) or hemispherical (Argo) shape, subjected to phosphochromatization, double primer, passivation at 120°C , liquid (texturized black) paint, baking at 150°C; opening with clips without tools, hinged lid with automatic retention system. Diffuser sealed with silicone to PMMA body with 3mm thickness; 50 Shore black silicone seal.
• Optical assembly complete with decompression valve.
• Vertical orientation with graduated scale +15° / -5° in pole-top/arm installation; +5°/-20° in lateral installation
• Monochromatic LED version with 39-59 (small body) and 84-98 (large body) power LED circuit, in Cool White (6000K) and Neutral White (4000 K) colour temperature, optics with plastic lens.
• LED average life at Ta 25°C: L70 >90000 h.
• Electronics average life at Ta 25°C=100000 h
• Pull-out control gear and optical assembly with fast-coupling connectors for quick independent operation.
• 220-240Vac 50/60 Hz built-in selv electronic ballast.
• Driver with internal temperature automatic control system.
• Product operation at 100% for Room Temperature (RT) from -20°C to + 36°C, at higher RT values the system reduces the intensity of power supply current of the LEDs to allow for correct operation.
• Version for -40°C RT on demand.
• Driver with 4 predefined operation profiles selected with deep switches, possibility of personalised operation cycles with dedicated software that can be transferred via USB drive.
• Protection system against mains spike up to 4Kv.
• Terminal block with 4 A T fuse
• Versions with twilight photocell (70 lux on-35 lux off).
• Stainless-steel external screws.
• Hot galvanized steel arms subjected to acrylic liquid paint treatment.
• Die-cast aluminium pole-top with single and double attachment for ø 60 – 76 - 102mm poles, triple for ø 102mm poles.
• Die-cast aluminium lateral attachment for tapered poles with diameter from 46 to 76mm.
•No light flow emission in upper hemisphere in horizontal position (in compliance with the strictest regulations against light pollution).
• The technical characteristics of the fitting comply with EN60598-1 standard.
• IP66
• ENEC approval
• IMQ Performance
• F seal
• Class of Insulation II
