[ new products ]

MultiWoody

• System of flanges, horizontal arms and multiple supports used to fit Maxiwoody floodlights (Compact, Small and Large body) on column, wall, ceiling and ground.

• Flanges for column installation made of die-cast aluminium for single or double floodlight. The flanges can be installed on all columns with 120mm or 102 diam. without drilling holes for mechanical fixing.

• The horizontal arms are made of die-cast aluminium flanges and galvanized steel sheet sections. Available in single or double version to house one or two Maxiwoody floodlights (max. four products). Arms are suitable for installation of iPro floodlight (large size) fitted either in the upper or lower part of the arm.

• The floodlight can be rotated and tilted in various configurations, also with the use of accessories (for horizontal arms).

• Flanges and horizontal arms for column installation are treated with texturized liquid paint with high resistance to weather agents and UV radiation.

• The columns made of hot galvanized steel with 70 micron thickness treated with texturized powder paint are available in different heights: some versions (5, 7 and 9m off ground, diam. 120m) are complete with holes and membrane cabling sheath for power cables.

• The maximum number of floodlights permitted on the column depends on the installation conditions (wind thrust, ground type, etc.); iGuzzini can provide stability calculations for all installation conditions.

• Multiwoody can be installed on wall, floor and ceiling with a series of steel/aluminium multiple supports suitable for installation of two or three floodlights.

• All external screws are made of A2 stainless steel.

• The technical characteristics of the luminaire comply with EN60598-1 standard and relevant detailed specifications.

• IP67 IK08
• F seal
• IMQ-ENEC homologation (except for LED versions)
• Insulation class II