156D
Colour
Optional accessories
Technical Data
last update: 06/11/2025Description
Direct light luminaire, designed for use with RGBW LED light sources, 220÷240Vac DMX512-RDM dimmable with search and addressing function. Ceiling, wall or support installation. Consisting of body and supports for installation to be ordered separately. Body in extruded aluminium, with die-cast aluminium end caps complete with silicone gaskets and subjected to a multi-step pre-treatment process, in which the main phases are degreasing, fluorozirconation (surface protective layer) and sealing (nano-structured silane layer). The subsequent painting phase is carried out with primer and liquid acrylic paint, baked at 150°, which provides high resistance to atmospheric agents and UV rays. Optical compartment closed at the top by a 3mm thick transparent glass screen fixed with silicone. Complete with RGBW power multiled plate and 220÷240Vac DMX512-RDM electronic driver (power supply included). Supplied with double PG11 and outgoing cables for through wiring with IP68 male/female connectors. Equipped with PMMA diffusing filter and optics with plastic (methacrylate) lens for Flood lighting. All external screws used are in A2 stainless steel. The technical characteristics of the appliances comply with EN 60598-1 and specific standards.
Dimensions
General (mm)
1502x47x83
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
3.7
Material
Aluminium
Product certification
-
BIS
Photometric data
Details
lm system
2414.5
W system
68.4
lm source
4390
W source
57
Luminous efficiency - lm/W (system value)
35.3
lm in emergency mode
-
Light output ratio (LOR)
55
Optic and beam angle
F - Flood
Adjustability
fixed
Colour temperature
RGBW - 4000K K
Lifetime LED 1
75,000h - L80 - B10 (Ta 25C)
Lifetime LED 2
74,000h - L80 - B10 (Ta 40C)
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Voltage
220 - 240 AC
ZVEI code
LED
Power Supply
Electronic Electronic Control card Power supply included included
Mounting options
Integral
Control
DMX-RDM
Installation
Description
For installation, adjustable wall brackets in AISI304 stainless steel are available as accessories.;
Mounting
Wall arm, Wall surface, Ceiling surface
Wiring
Complete with DMX-RDM control board and 220÷240Vac electronic power supply. The product is supplied with a double PG11 nickel-plated brass cable gland with outgoing H07RN-F 5x1.5mm² rubber cables for through wiring with IP68 male and female connectors. For electrical connection and DMX-RDM control available: 5-pole IP68 female connector, 5-pole IP68 male connector + closing cap (BZI6), male connector + 5-pole IP68 female connector.
Notes
Product complete with LED lamp. DMX specifications require the insertion of a 120 ohm termination resistor to be inserted between the DATA+ and DATA- cables of the last product in the line (BZQ7).