169D

Direct light luminaire, designed for use with RGBW LED light sources with Neutral white LED, 220÷240Vac DMX-RDM dimmable with search and addressing function and transparent glass. Recessed installation on floor, wall and ceiling. Possibility of installation in continuous rows up to a maximum length of 10.5m only for recessed floor installation. Consisting of body, end caps, housing and caps to be ordered separately. Body in extruded aluminium with die-cast aluminium end caps complete with silicone gaskets. Painting process with multi-step pre-treatment, in which the main phases are degreasing, fluorozirconation (surface protective layer) and sealing (nano-structured silane layer). The subsequent painting phase is carried out with primer and liquid acrylic paint, baked at 150°C, which provides high resistance to atmospheric agents and UV rays. Lower box for wiring in PPS (polyphenylene sulphide). Optical compartment closed at the top by a screen in extra-clear screen-printed transparent glass, 8mm thick, fixed with silicone. Complete with power multiled plate with individual Red, Green colour LEDs. Blue and white in the 4000K version (RGBW) and 220÷240Vac DMX-RDM electronic driver (power supply included). Equipped with optics with plastic (methacrylate) lens. In the lower part of the optical compartment there is a PPS (polyphenylene sulphide) box equipped with two PG11 nickel-plated brass cable glands and outgoing cables for through wiring (connectors to be ordered separately). For fixing the optical compartment to the housing or false ceiling, the product is equipped with a quick coupling system using hexagonal head keys. All external screws used are in A2 stainless steel.

Recessed installation on floor and wall using a housing to be ordered separately, together with the end caps for the optical compartment and caps for the housings. Possibility of installation in continuous rows up to a maximum length of 10.5m only for recessed floor installation: in this case, intermediate joints for the housings must also be ordered separately. In floor installation, it is necessary to create a drainage channel or insert gravel for drainage under the housing before its installation, to guarantee the expected degree of protection. For ceiling installation with plasterboard panels (thicknesses from 1÷30mm), provide preparation openings as shown on the instruction sheet and use the steel cable kit accessory with reinforcement plates.;

Product complete with LED lamp. DMX specifications require the insertion of a 120 ohm termination resistor to be inserted between the DATA+ and DATA- cables of the last product in the line (BZQ7).