3550
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Product for linear lighting – fitted with monochromatic white LEDs with high colour rendering – assembled on white flexible circuit; transparent silicone sheath outer protection with end caps. IP65 protection rating for the full-length strip (undivided). The circuit ends include connectors with IP20 protection rating, therefore the installer is responsible for adapting the insulation level of the connectors. Supplied in 5-metre coils wound on special supports; supplied with a connection kit for connections in line or to power supply. The strip can be cut into 125mm-long sections; in case of intermediate cuts, ensure that the cut ends are carefully sealed so that the original protection conditions are restored. LED characteristics: White 4000K - CRI 90 - SDCM 3 - 56 LEDs/m - 112° beam angle - 72 W in total - 24V power supply. Control gears to be ordered separately.
Dimensions
General (mm)
5000x11x4
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
336
Product certification
-
BIS -
QCERT -
ENEC pending
Photometric data
Details
lm system
W system
lm source
1285
W source
15
Luminous efficiency - lm/W (system value)
87.5
lm in emergency mode
-
Optic and beam angle
GL - general lighting
Adjustability
fixed
Light colour quality
CRI (minimum) 90
Colour temperature
3000 K
Electrical data
Voltage
24 DC
ZVEI code
LED
Power Supply
Electronic Driver not included
Mounting options
Remote
Installation
Description
Fixing kit: clips (code MWG2: 10 pieces) and rigid aluminium support (code MWG1: 5 pieces x 1 m) - The strip is configured for being combined with all Underscore 15 profiles.;
Mounting
Wall arm, Ceiling surface
Wiring
Constant voltage ballast ordered separetely; available for single coil (ON-OFF code MZ14 / DALI dimmable code MZ15). The control gear and coil are connected through connectors (IP20) supplied with the strip package.
Notes
To ensure correct heat dissipation, the strip should be used in conjunction with the available profiles. The relevant connectors guarantee an IP20 protection rating. If the strip is cut (at the configured points), ensure that the various parts are carefully sealed once they have been joined together.