AKS6
Colour
Technical Data
last update: 02/12/2025Description
Direct light luminaire, designed to use monochrome LED lamps. It consists of a body, an optical assembly and a base for fixing it to the wall. Optical assembly and die-cast aluminium glass-holder frame. 5mm thick tempered sodium-calcium closing glass with black serigraphy. Comfort prismatic glass with black serigraphy. Body and optical assembly subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. Transversal Asymmetric Comfort Optic (AT) with high performance Opti-smart reflectors in superpure aluminium coated with silver deposits offering uniform light distribution. Both the LED unit and the ballast may be substituted. Optical assembly complete with electronic control gear and output power cable. IP68 connectors to be ordered separately are required for the electrical connection. All the screws used are made of A2 stainless steel.
Dimensions
General (mm)
290x126x50
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
2.5
Material
Aluminium
Product certification
-
BIS -
CCC S&E -
CE -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
1404
W system
13.8
lm source
1950
W source
11
Luminous efficiency - lm/W (system value)
101.74
lm in emergency mode
-
Light output ratio (LOR)
72
Optic and beam angle
Asymmetric transversal comfort
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 96
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L90 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Voltage
220 - 240 AC
ZVEI code
LED
Power Supply
Electronic Driver included
Mounting options
Integral
Control
On/off
Installation
Description
Wall-mounted with screw anchors not supplied with the product.;
Mounting
Wall surface
Wiring
Product complete with 220÷240V ac electronic control gear.
Notes
Overvoltage protection: 4kV in
Common Mode (CM), 2kV in
Differential Mode (DM).
• The SPD accessory (JAL6)
increases overvoltage protection to
6kV/10kV (CM/DM).