BD37
Colour
Optional accessories
Technical Data
last update: 08/11/2025Description
Floodlight designed to use Warm White LED lamps and lenses for flooddistribution. The luminaire consists of an optical assembly/component-holding box and hidden fixing bracket. The optical assembly and front frame are made of die-cast aluminium alloy coated with liquid acrylic paint (colour: RAL 9007 grey) or textured liquid paint (colour: RAL 9016 white) with a high level of resistance to atmospheric agents and UV rays. The 5 mm thick transparent, tempered sodium – calcium safety glass is joined to the frame with silicone. The frame is fastened to the optical assembly by two M5 AISI 304 stainless steel captive screws and a galvanised steel safety cable. The optical assembly contains the circuit complete with 9 LEDs and relative plastic lenses. The component-holding box, in the rear of the luminaire, is set up to hold the control gear, which is fixed with captive screws on a galvanised steel pull-out plate. The control gear can be accessed through the rear door made of painted aluminium alloy, fixed to the product body with four M5 AISI 304 stainless steel captive screws and a safety cable. The luminaire is set up for pass-through wiring using two PG11 nickel–plated brass cable clamps, suitable for the entry of cables with diameter between 6.5 and 11 mm. The connection between the mains and the control gear is made using a 3-pole terminal board with quick-coupling system. iPro can be angled relative to the horizontal plane (+95°/ -5°) using an extruded aluminium bracket on which the graduated scale (15° steps) is marked with serigraphy. The internal silicone seals guarantee watertightness IP66. Various accessories are available: visor, directional flaps, glass refractors, glass prismatic diffusers and coloured filters which can be applied in pairs. All external screws used are made of A2 stainless steel.
Dimensions
General (mm)
132x132x140
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
2.76
Material
Aluminium
Product certification
-
BIS -
CE -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
1449
W system
17.8
lm source
2100
W source
16
Luminous efficiency - lm/W (system value)
81.4
lm in emergency mode
-
Light output ratio (LOR)
69
Optic and beam angle
M - Medium 20°
Adjustability
directional
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 86 - Rg (Gamut Index) 96
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -25°C a 40°C.
Inrush current
5 A / 50 µs
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Control
On/off
Installation
Description
Wall-, ceiling- and ground-mounted using bracket and fisher (not included). Can be ground-mounted with stake accessory. Can be mounted on branches with belt accessory. Dimensions:;
Mounting
Wall surface, Ground spike, Ceiling surface, Free standing
Wiring
Luminaire with electronic control gear (220 - 240V ac, 50/60 Hz).
Notes
IK 09 with protective grille accessory