BV84
Colour
Optional accessories
Technical Data
last update: 02/12/2025Description
Floor or ground-recessed luminaire designed to use white monochrome LED lamps, a fixed optic and a built-in electronic ballast. The round frame measures D = 144 mm, the body and frame are made of AISI 304 stainless steel and the extra-clear, sodium - calcium tempered glass cover is 12mm thick. The stainless steel body is painted black. The luminaire is fixed to the outer casing using two Torx type screws that hold it in place. The unit comes complete with LED circuit. The product's wiring system features an A2 stainless steel cable gland with a 1200 mm long H07RNF type 2x1 mm² output power cable. The cable is equipped with an anti-transpiration device (IP68) that consists of a silicone-coated joint located on the power cable and positioned in the control gear box. An outer casing is available for installation and can be ordered separately from the plastic optic assembly. The glass unit, optical assembly, frame and outer casing together guarantee a maximum static load resistance of 5000 kg. The maximum surface temperature of the glass is less than 40°C.
Dimensions
Diameter (mm)
ø144
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.5
Material
Stainless steel
Product certification
-
BIS -
BVB Byggvarube- dömningen -
CCC S&E -
CE -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
195
W system
11.6
lm source
1300
W source
9.7
Luminous efficiency - lm/W (system value)
16.81
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
195
Light output ratio (LOR)
15
Optic and beam angle
WW - Wall Washer
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 83 - Rg (Gamut Index) 92
Colour temperature
4000 K
MacAdam Step
2
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Voltage
220 - 240 AC
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
The product is fixed to the outer casing using two Torx type securing screws. The unit can be floor-recessed using the outer casing for installation or ground-recessed.;
Mounting
Floor recessed, Ground recessed
Wiring
Product complete with 220÷240V ac electronic control gear.
Notes
IP68 rating on both the product and the cable using IP68 connectors
* The product is not suitable for installation in swimming pools and fountains. Overvoltage protection: 2kV Common Mode, 1kV Differential Mode