Region and Language

Product standard

Your language

E839

Downloads

Colour

Optional components

Technical Data

last update: 08/11/2025
Description
Outdoor luminaire with a street optic (ST1.2), designed to use LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. Diffusor made of shockproof, UV-stabilised injection moulded polycarbonate. Complete with circuit fitted with Warm White monochrome LEDs. Optical assembly consisting of an anodized super-pure aluminium upper reflector, a methacrylate lens and a lower reflector made of metallised PC. Replaceable leds and driver. Electronic selv driver with automatic internal temperature control system.
Dimensions
Diameter (mm) ø650
Technical performance
  • Class II

    Class II

  • Completely protected against penetration of dust, Protected against waves

    Completely protected against penetration of dust, Protected against waves

  • Protected against 20 j shocks

    Protected against 20 j shocks

Complies with EN60598-1 and pertinent regulations

Physical properties
Material Aluminium and thermoplastic
Product certification
  • BIS
    BIS
  • CE
    CE
  • QCERT
    QCERT

Photometric data

Details

lm system
1010
W system
10.7
Luminous efficiency - lm/W (system value)
94.39
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
5.45
Light output ratio (LOR)
100
Optic and beam angle
ST1.2 - road optic I = 4h / d = 1,2
Adjustability
fixed
Light colour quality
CRI 70
Colour temperature
3000 K
MacAdam Step
5
Lifetime LED 1
100,000h - L90 - B10 (Ta 25C)
Lifetime LED 2
100,000h - L80 - B10 (Ta 25C)

Electrical data

Voltage 220 - 240
ZVEI code LED
Power Supply Electronic Driver included
Mounting options Integral

Installation

Description

The luminaire can be installed with a pole-top mounting on poles with ø 60mm and 76mm end part using X102 and X126 accessories. Secured to the pole by two bolts.;
Mounting Pole-top
Wiring The product is supplied wired and with an outlet cable.

Notes

Overvoltage protection: 6KV Common mode, 7KV differenzial mode
Subscribe