ED27
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Outdoor luminaire with direct light asymmetric optic for increased visual comfort, designed to use LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are: degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather resistance. Option of also adjusting, with a graduated scale, the inclination in relation to the road surface of +15°/-10° (in 5° steps) for a pole-top installation and +5°/20° (in 5° steps) for a lateral installation. 5 mm thick tempered sodium-calcium closure glass. The glass secured to the frame closes the led optical assembly which is secured to the components assembly with a hinge and 2 screws. The high IP rating is guaranteed by the silicone gasket placed between the two elements. Complete with circuit featuring monochrome LEDs and silver aluminium reflectors. LED assembly can be replaced directly on site.
Dimensions
General (mm)
765x412x268
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
15.3
Material
Die-cast aluminium
Product certification
-
BIS -
CE -
ENEC-03
Photometric data
Details
lm system
10850
W system
84.6
lm source
W source
Luminous efficiency - lm/W (system value)
128.25
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
A60 - Asymmetric h = 7 / d = 2
Adjustability
up/down tilt
Light colour quality
CRI (minimum) 70 - Rf (Colour Fidelity Index) 76 - Rg (Gamut Index) 94
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L90 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -40°C a 50°C.
ZVEI code
LED
Power Supply
Electronic Driver
Control
Middle of the night
Installation
Description
The floodlight can be installed with pole-top or lateral mounting using a die-cast aluminium pole-top for diameters of 46/60/76 mm. Diameters from 60 to 76 mm without using the standard adaptor, and from 46 to 60 mm with the adaptor.
Secured to the pole by two bolts and two safety locking nuts.;
Mounting
Wall arm, Pole-top
Wiring
The pole-top attachment guarantees the completely safe passage of power cables, avoiding piercing. 6-pole terminal board for ø 7-14mm cables.
Overvoltage protection: 10KV Common Mode and 6KV Differential Mode