EG82
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional accessories
Technical Data
last update: 07/11/2025Description
Direct light luminaire, designed to use RGBW LED lamps, DMX512-RDM 48Vdc dimmable with searching and addressing function. Ceiling-, wall- or surface-mounted. Consists of a body and supports for installation, to be ordered separately. The body is made of extruded aluminium and includes die-cast aluminium end caps with 50/60 Shore A silicone seals. It is subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of weather and UV ray resistance. The top of the optical assembly is closed by a 3 mm thick transparent glass screen, fixed with silicone. Complete with multi-LED plate in RGBW colour and a 48V dc DMX512-RDM electronic driver (ballast to be ordered separately). Supplied with a double PG11 and outlet cables for pass-through wiring with IP68 male/female joiners. Fitted with a PMMA diffusing filter and optics with plastic (methacrylate) lens for Flood lighting. All external screws used are made of A2 stainless steel. The luminaire technical characteristics conform to EN 60598-1 standards and particular requirements.
Dimensions
General (mm)
611x47x83
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.8
Material
Aluminium
Product certification
-
BIS -
CCC S&E -
CE -
ENEC-03 -
QCERT
Photometric data
Details
lm system
766.8
W system
17.3
lm source
1420
W source
14
Luminous efficiency - lm/W (system value)
44.32
lm in emergency mode
-
Light output ratio (LOR)
54
Optic and beam angle
F - Flood 34°
Adjustability
fixed
Colour temperature
RGBW - 4000K K
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
97,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Voltage
48 V DC
ZVEI code
LED
Power Supply
Electronic Electronic Control card Power supply included not included
Mounting options
Integral
Control
DMX-RDM
LED Current
300
Installation
Description
Accessories are available for installation, like adjustable AISI304 stainless steel wall-mounted arms.;
Mounting
Wall arm, Wall surface, Ceiling surface
Wiring
Complete with DMX-RDM 44÷52Vdc control card. The product is supplied with a nickel-plated brass PG11 double cable gland with 05RN-F 2x1,5mm²+3x0,35mm² rubber outlet cables for pass-through wiring with joiners (illegible part). Available for electrical connection and DMX-RDM control: IP68 5-pin female connector, IP68 5-pin male connector + closing cap (BZI6), and IP68 5-pin male + female connectors.
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessoriesNotes
Product complete with LED lamp. DMX specifications require the insertion of a 120 Ohm terminating resistor to be placed between the DATA+ and DATA- cables of the last product in the line (BZQ7).