EI43
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional accessories
Technical Data
last update: 21/10/2025Description
Luminaire for walkways designed to use high visual comfort LED lamps. Ceiling and wall-recessed installation. It consists of an optical assembly with an IP66 protection rating and an outer casing or wall-mounted base to be ordered separately. The optical assembly and base are made of aluminium alloy treated with powder paint, which provides a high level of resistance to weather and UV rays. Plastic closure guard at the rear of the optical assembly. Complete with plastic cable gland and outlet cable. Sodium-calcium tempered satin finish safety glass. Luminaire with no visible screws and an anti-vandal system that uses an opening key to access the rear wiring compartment (supplied in the package). All external screws used are made of A2 stainless steel.
Dimensions
General (mm)
60x270x90
Shape
Rectangular
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.45
Material
Die-cast aluminium and thermoplastic
Product certification
-
BIS -
CE -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
360
W system
12
lm source
1500
W source
8.6
Luminous efficiency - lm/W (system value)
30
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
10
Light output ratio (LOR)
24
Optic and beam angle
AL - Longitudinal asymmetric optic
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 83 - Rg (Gamut Index) 95
Colour temperature
4000 K
MacAdam Step
3
Lifetime LED 1
77,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
77,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
ZVEI code
LED
Power Supply
Electronic Driver not included
Mounting options
Remote
Control
PWM
LED Current
65
Installation
Description
Wall-recessed installation with a plastic outer casing to be ordered separately. Disposable polystyrene formwork for creating the outer casing housings for installations in concrete walls that are then plastered or finished with bricks so the end surface is flush with the optical assembly. If ceiling-mounted an aluminium base is used to be ordered separately.;
Mounting
Wall arm, Wall recessed, Wall surface
Wiring
Version with remote 24Vdc ballast.
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessories