ES21
Colour
Corrente
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional accessories
Technical Data
last update: 08/11/2025Description
Floor or ground-recessed luminaire designed to use white monochrome LED lamps, a fixed optic and powered with a continuous current of 350/500mA. The round frame with no visible screws and the optical assembly are made of AISI 304 stainless steel with an extra-clear, sodium-calcium tempered glass cover. The luminaire is fixed to the outer casing using special locking seals that hold it in place. The unit comes complete with LED circuit and methacrylate lens. The product's wiring system features an A2 stainless steel cable gland with a 1800 mm long H05RNF type 2x1 mm² output power cable. The cable is equipped with an anti-transpiration device (IP68) that consists of a silicone-coated joint located on the power cable. An outer casing is available for installation and can be ordered separately from the plastic optic assembly. The glass unit, optical assembly, frame and outer casing together guarantee a maximum static load resistance of 2000 kg. The maximum surface temperature of the glass is less than 40°C.
Dimensions
Diameter (mm)
ø74
Shape
Round
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.43
Material
Stainless steel
Product certification
-
BIS -
CE -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
434 - 587
W system
4 - 5.5
lm source
510 - 690
W source
3.8 - 5.5
Luminous efficiency - lm/W (system value)
108.38
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
434
Light output ratio (LOR)
85
Optic and beam angle
S - Spot 8.8°
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 83 - Rg (Gamut Index) 95
Colour temperature
4000 K
MacAdam Step
2
Lifetime LED 1
98,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
99,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -25°C a 50°C.
ZVEI code
LED
Power Supply
Electronic Power supply not included
Mounting options
Remote
Dimmable option
Dimmable
LED Current
350 / 500
Installation
Description
The product is fixed to the outer casing using special locking seals with toolfree installation. The unit can be floor-recessed using the outer casing for installation or ground-recessed without the outer casing.;
Mounting
Floor recessed, Ground recessed
Wiring
Ballasts available: traditional and IP67 sealed 350/500mA. The product comes complete with a 1800 mm long H05RNF type 2x1 mm² output power cable and an electronic plate with a 350/500mA Max LED. Ballast to be ordered separately.
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessoriesNotes
IP68 rating on both the product and the cable using IP68 connectors
* The product is not suitable for installation in swimming pools and fountains. Versions with a Brass (.14), Bronze (.69) and Burnished Chrome (.E6) finish applied with PVD (Physical Vapor Deposition) coating technology on the stainless steel frame.