J777
Colour
Technical Data
last update: 21/10/2025Description
Interface for Quick BLE system. Operates in combination with BLE-DALI interfaces.
Allows the connection of 4 push-buttons single pole (SPST) and normally open (N.O.) Functions: General ON/OFF and dim, ON/OFF and dim of Group1, Group2, Group3 connected to the Quick BLE system.
It is powered by the DALI line; current drawn 6 mA (3 DALI loads) -
push terminals.
Operating temperature 0 ... +60 °C
Dimensions
General (mm)
47x28x14
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.2
Material
Polycarbonate
Electrical data
Power Supply
Electronic Driver not included
Mounting options
Remote
Control
DALI
Installation
Description
can be placed into the electrical box that houses the push-buttons.;
Wiring
The push-buttons are connected to the device via 5 cables (1 common cable and 4 separate cables, from T1 to T4). Maximum distance of buttons from device: 50 cm.
The bus cables can be connected to any point of the DALI line.
Notes
Supplied with 7 cable lengths (25 cm long)
PC sheath material, halogen-free.
The J777 command acts ONLY on the BLE-DALI interface it is connected to and is not retransmitted to the other BLE system interfaces through the mesh network.
The J777 command acts ONLY on the BLE-DALI interface it is connected to and is not retransmitted to the other BLE system interfaces through the mesh network.