M254
Colour
Technical Data
last update: 21/10/2025Description
Product for linear lighting – with monochromatic white LED – realized on white flexible circuit covered with a silicone layer; the IP67 protection to the strip with integral length (not dissected) is granted by the silicone cover. The circuits extremities are supplied with IP20 connectors, for this reason it is advised the use of the strips for internal installation. It is supplied in 5 mts coils rolled up in special supports; it is included into the packaging a kit for connections in series or to the gear. The rear part of the circuit is provided with adhesive for a quick installation; availability of mounting accessories for less easy installations. The strip can be dissected at wheelbase of 50 mm (3 LED minimum); in case of intermediate cuts it is necessary to be sure that the cut extremities had been sealed with accuracy. LED characteristics: white color 2700K (such value i san indicative one and can be subject to variations) – 60 LEDs/m – beam angle 120° - 24W in total – feeding 12V – 3 coils maximum to be connected in series. Gears to be ordered separately.
Dimensions
General (mm)
1000x10x3
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Product certification
-
BIS -
QCERT
Photometric data
Details
lm system
1850
W system
24
lm source
370
W source
4.8
Luminous efficiency - lm/W (system value)
77.08
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
24
Light output ratio (LOR)
100
Optic and beam angle
GL - general lighting
Light colour quality
CRI (minimum) 80
Colour temperature
2700 K
Lifetime LED 1
40,000h - L70 (Ta 25°C)
Electrical data
ZVEI code
LED
Installation
Description
Quick installation with adhesive; for a safer fastening are available clips (code MWG1: 10 pcs) and a rigid aluminium support (code: MWG2: 5 pcs x 1 mt);
Mounting
Wall arm
Wiring
Gears at constant voltage to be ordered separately; available for a sole coil (code: MWF7) or for a maximum of 3 coils in series (code:MWF8). Connection gear/coil through connectors (IP20) included into the strip packaging.
Notes
The connectors grant an IP20 protection, for this reason it is advised the use of strips in internal installations. in case of cuts to the strips it is necessary to restore the sealing with accuracy after having done the connection weldings.