M825
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Linear lighting product – with white monochrome LEDs – made on a white flexible printed circuit. With end caps and transparent PVC sheath for external protection. The protection rating is IP65 for the full-length strip (not cut). The ends of the circuits are fitted with connectors which have an IP20 protection rating. Supplied in 5-metre long coils wound in suitable supports. The package includes a connections kit for in line or power supply connections. Can be installed using the mounting accessories available. The strip can be cut at centre-to-centre distances of 50mm (minimum 3 LEDs). If intermediate cuts are made, use the caps included and carefully seal the cut ends to restore the protection.LED characteristics: 2700K white colour (the value is approximate and may vary) - 60 LEDs/m – flare angle 140° - 24W total – power supply 12V – max. 2 coils can be connected in line.Ballasts to be ordered separately
Dimensions
General (mm)
1000x10x4
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Technopolymer
Product certification
-
BIS -
ENEC-03 -
QCERT
Photometric data
Details
lm system
2500
W system
24
lm source
500
W source
4.8
Luminous efficiency - lm/W (system value)
104.17
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
86
Light output ratio (LOR)
100
Optic and beam angle
GL - general lighting
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 92
Colour temperature
2700 K
MacAdam Step
3
Lifetime LED 1
40,000h - L70 (Ta 25°C)
Electrical data
Voltage
12 DC
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Remote
Installation
Description
fixing kit: clips (code MWG2: 10 pieces) and aluminium rigid support (code MWG1: 5 pieces x 1 m);
Mounting
Wall surface
Wiring
Constant voltage ballasts to be ordered separately; available for a single coil (code MZ08) or for a maximum of 3 coils in line (code MZ09) the in-series connection is possible up to 20 m (4 coils) allowing for any differences in luminosity on the line. Ballast/coil connection with connectors (IP20) included in the pack with the strip
Notes
The connectors provided guarantee protection rating IP20, therefore we recommend that the strips are used indoors.If the strip is cut (in the appropriate areas) carefully restore the seal after making the connection