MC62
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Linear lighting product - with white monochrome LEDs - made on a white flexible printed circuit. The position of the LEDs on the printed circuit, rotated through 90° compared with standard strips, allows ideal application in niches, edging and curved backlighting. With end caps and transparent silicone sheath for external protection. The protection rating is IP65 for the full-length strip (not cut). The ends of the circuits are fitted with connectors which have an IP20 protection rating. Supplied in 5-metre long coils wound in suitable supports. The package includes a connections kit for in line or power supply connections. Use the accessory clips for installation. The strip can be cut at centre-to-centre distances of around 50mm (minimum 3 LEDs). If intermediate cuts are made, use the caps included and carefully seal the cut ends to restore the insulation.
LED characteristics: 2700K white colour (the value is approximate and may vary) - 60 LEDs/m - flare angle 130° - 24W total power supply 12V - max. 2 coils can be connected in line. Ballasts to be ordered separately.
Dimensions
General (mm)
5000x8
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Technopolymer
Product certification
-
BIS -
QCERT
Photometric data
Details
lm system
1350
W system
24
lm source
270
W source
4.8
Luminous efficiency - lm/W (system value)
56.25
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
53
Light output ratio (LOR)
100
Optic and beam angle
GL - general lighting
Adjustability
fixed
Colour temperature
2700 K
Lifetime LED 1
40,000h - L70 (Ta 25°C)
Electrical data
Voltage
12 DC
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Remote
LED Current
20
Installation
Description
accessory fixing kit: clips (10 pieces) code MWG2;
Mounting
Wall surface
Wiring
Constant voltage ballasts to be ordered separately. Available for a single coil (code MZ08) or for a maximum of 2 coils in line (code MZ09). Up to 15 m (3 coils) can be connected in series, if users accept differences in the brightness on the line. Interface for DALI dimming available (code MWP3). Ballast/coil connections with connectors (IP20) included in the pack with the strip
Notes
The connectors provided guarantee protection rating IP20, therefore we recommend that the strips are used indoors.
If the strip is cut (in the appropriate areas) carefully restore the seal after making the connection