MI62
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Linear lighting product - with white monochromatic LEDs - made on silicone-covered white flexible circuit. External protection in
clear PVC sheath with end caps. The silicone protection ensures IP65 protection degree for strips with integral length
(not cut). The circuit ends are provided with IP20 connectors, therefore the installer is responsible for completing the insulation operations. The product is supplied in 5 metre coils wrapped around special supports; supplied with connection kit for connections in line or power supply. The back of the circuit is provided with adhesive for quick application; mounting accessories are available for more difficult installations The strips can be cut at predefined distances of 100mm (minimum 6 LEDs); in case of intermediate cuts use the
end caps supplied and the cut ends must be sealed carefully to restore the protection conditions. LED characteristics: white 2400K (the value is indicative and subject to changes) - 60 LED/m - opening angle 120° - 72W total
- power supply 24V. Control gears ordered separately
Dimensions
General (mm)
5000x11x4
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Product certification
-
BIS -
QCERT
Photometric data
Details
lm system
1250
W system
14.4
lm source
1250
W source
14.4
Luminous efficiency - lm/W (system value)
86.81
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
51
Light output ratio (LOR)
100
Optic and beam angle
GL - general lighting
Adjustability
fixed
Light colour quality
CRI (minimum) 80
Colour temperature
2400 K
Lifetime LED 1
40,000h - L70 (Ta 25°C)
Electrical data
ZVEI code
LED
Installation
Description
fixing kit: clips (code MWG2: 10 items) and rigid aluminium support (code MWG1: 5 items x 1 m);
Mounting
Wall arm
Wiring
Constant voltage ballast ordered separetely; available for single coil (ON-OFF code MWK5 / DALI dimmable code MZ15). Power supply / coil connections with connectors (IP20) included with the strip
Notes
The connectors supplied guarantee a protection degree IP20. If the strips are cut (in the special zones) restore the seal thoroughly after having performed the connecting soldering