MI70
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Product for linear lighting - with RGB LEDs - made on a white flexible circuit coated with a layer of silicone; the silicone protection guarantees IP65 protection for the uncut strip. The ends of the circuits are fitted with connectors with IP20 protection, therefore we recommend that the strips be used indoors. Supplied in 5-metre long coils wound on suitable supports; the pack includes a connections kit for in line or power supply connections. The back of the circuit is coated with adhesive for rapid application; mounting accessories are available for less simple installations. The strip can be cut at a centre-to-centre distance of 62.5 mm (minimum 3 LEDs); if intermediate cuts are made, ensure that the cut ends are carefully sealed. LED features: RGB full colour - 48 LEDs/m - flare angle 100°
Dimensions
General (mm)
5000x10x3
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Product certification
-
BIS -
QCERT
Photometric data
Details
lm system
389
W system
11.52
lm source
W source
Luminous efficiency - lm/W (system value)
33.77
lm in emergency mode
-
Optic and beam angle
GL - general lighting
Adjustability
fixed
Colour temperature
RGB K
Electrical data
Voltage
12 DC
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Remote
Installation
Description
rapid installation with adhesive; clips are available for added fixing guarantees (code MWG2: 10 pieces) and rigid aluminium supports (code MWG1: 5 pieces x 1m);
Mounting
Wall surface
Wiring
Ballasts and sequencers to be ordered separately. Sequencers: PWM master model with radio control (code MZ09); PWM model without radio control (code MWG0). Using MZ09 - master - it is possible to join 2 strips for each MWG0 - slave - in a continuous sequence; in this case it is important to calculate the total power of the installation (for the power supply), considering that by using the sequencers the power of each strip is reduced to 1/3 (~19W)
Notes
The connectors grant an IP20 protection, for this reason it is advised the use of strips in internal installations. in case of cuts to the strips it is necessary to restore the sealing with accuracy after having done the connection weldings.