MR97
Colour
Technical Data
last update: 07/11/2025Description
Fixed linear module with LEDs, specifically designed to be housed in the Laser Blade System channel. The steel coupling plate includes the lighting group and the operating components. Asymmetrical optic system designed to achieve an effective wall washer distribution. Flux enhancer - superpure aluminium reflector - screen in PMMA with ribbed texture; a special film in acrylic material, combined with the screen, allow for a uniform and effective light emission on the wall. Black polycarbonate internal perimeter frame. Supplied with electronic control gear connected to the luminaire. Neutral white LED - lifetime with residual flow at 80% (L80): 50,000 hours - Ta 25°.
Dimensions
General (mm)
755x89
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.3
Material
Aluminium and technopolymer
Product certification
-
BIS -
CE -
ENEC-03 -
QCERT
Photometric data
Details
lm system
779.8
W system
24.5
lm source
2000
W source
21
Luminous efficiency - lm/W (system value)
31.83
lm in emergency mode
-
Light output ratio (LOR)
39
Optic and beam angle
WW - Wall Washer
Light colour quality
CRI (minimum) 95 - Rf (Colour Fidelity Index) 92 - Rg (Gamut Index) 98
Colour temperature
4000 K
MacAdam Step
3
Lifetime LED 1
50,000h - L90 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
230
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Dimmable option
Dimmable
Control
DALI
Installation
Description
Double rotating pin blocking system with return spring to facilitate the insertion in the profile seating. Can be manoeuvred with a screwdriver. To light the wall correctly the wall washer modules must be inserted at a specific distance and centre-to-centre distance (shown on the instructions sheet). This is why when using these modules the position of the channel must be designed to comply with the required distances.;
Mounting
Ceiling recessed
Wiring
The module is fitted with connectors on both sides for connecting with subsequent modules. For connections at greater distances, there are accessory connectors (code MXN6 - cables not included).
Notes
dimming function with pushbutton (TOUCH DIM/PUSH): for this option consult the instructions included in the package.