MT96
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Linear lighting product - with white monochrome LEDs - made on a white flexible printed circuit. 120 LED/m. Packaged in 5-metre long coils wound around suitable supports. Ultraslim thickness (5.6 mm). External, double thickness silicone elastomer cover: milky finish in the emission zone; traslucent in the circuit zone to facilitate cutting operations. The ends of the circuits are fitted with cables marked with polarity labels (IP20 protection rating). The strip is designed for use with the appropriate Underscore6 profiles. When the connection insulation has been adapted (by the installer) the strip inserted in the profile guarantees an IP65 protection rating. Strips can be cut at distances of 50 mm; in the event of intermediate cuts, use the caps included and make sure you seal the cut ends carefully to restore the correct protection conditions, using only the silicon coated adhesive tape included. LED characteristics: white 3000K (the value is approximate and may vary) - 24V power supply - Ballasts should be ordered separately.
Dimensions
General (mm)
5000x5x16
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.4
Product certification
-
BIS -
CE -
QCERT
Photometric data
Details
lm system
200
W system
9.2
lm source
200
W source
9.2
Luminous efficiency - lm/W (system value)
21.74
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
1
Light output ratio (LOR)
100
Optic and beam angle
GL - general lighting
Adjustability
fixed
Light colour quality
CRI (minimum) 80
Colour temperature
3000 K
Lifetime LED 1
30,000h - L70 (Ta 25°C)
Electrical data
Voltage
24 DC
ZVEI code
LED
Power Supply
Electronic Driver not included
Mounting options
Remote
Installation
Description
Ony to be used with Underscore6 profiles. Insert the profiles by simply pressing them into place. Make sure the profiles are inserted correctly inside the profile, as shown in the instruction sheet.;
Mounting
Wall recessed, Ceiling recessed, Wall surface, Ceiling surface
Wiring
Constant voltage (24V) ballasts should be ordered separately.
Notes
The circuit cables guarantee an IP20 protection rating. For details of how to cut and use the Underscore6 profiles, read the instructions sheet carefully.