MX51
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Linear lighting product - with white monochromatic LEDs - made on white flexible circuit. External protection in
clear PVC sheath with end caps. IP65 protection degree for strips with integral length
(not cut). The circuit ends are provided with IP20 connectors, therefore the installer is responsible for completing the insulation operations. The product is supplied in 5 metre coils wrapped around special supports; supplied with connection kit for connections in line or power supply. Use the available accessories for the installation. The strips can be cut at predefined distances of 25mm (minimum 3 LEDs); in case of intermediate cuts use the
end caps supplied and the cut ends must be sealed carefully to restore the protection conditions. LED characteristics: white 2700K (the value is indicative and subject to changes) - 120 LED/m - opening angle 140° - 48W total
- power supply 12V - max 2 coils connected in line. Control gears ordered separately
Dimensions
General (mm)
5000x11x4
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Die-cast aluminium
Product certification
-
BIS -
QCERT
Photometric data
Details
lm system
4300
W system
48
lm source
860
W source
9.6
Luminous efficiency - lm/W (system value)
89.58
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
141
Light output ratio (LOR)
100
Optic and beam angle
GL - general lighting
Adjustability
fixed
Light colour quality
CRI (minimum) 80
Colour temperature
2400 K
Lifetime LED 1
40,000h - L70 (Ta 25°C)
Electrical data
Voltage
12 DC
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Remote
Installation
Description
fixing kit: clips (code MWG2: 10 items) and rigid aluminium support (code MWG1: 5 items x 1 m);
Mounting
Wall surface
Wiring
Constant voltage ballast ordered separetely; available for max 2 coils in parallel (code MZ09); up to 10 m (2 coils) can be connected in series with a slight drop in luminosity along the line. DALI dimming interface (code MWP3). Power supply/ coil connections with connectors (IP20) included with the strip
Notes
The connectors supplied guarantee a protection degree IP20. If the strips are cut (in the special zones) restore the seal thoroughly after having performed the connecting soldering