.jpg)
MY03
Colour
Technical Data
last update: 09/03/2026Description
Power supply with on‑off operation, max 20 W depending on the set current. Input Vin = 220–240 Vac 50–60 Hz. Constant‑current output of 500 mA already selected via dip‑switch.
Product features include overvoltage protection, short‑circuit protection, overcurrent protection, and over‑temperature protection.
Dimensions
General (mm)
111x52x22
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.09
Product certification
-
EAC
Electrical data
Maximum number of luminaires of this type per minature circuit breaker
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
Overvoltage protection
2kV Common mode & 1kV Differential mode
Inrush current
5 A / 50 µs
Power Supply
Electronic Driver included
Mounting options
Integral
Control
On/off
Frequency
0/50/60 Hz
Installation
Description
Equipped with slots for optional screw mounting.;
Wiring
Input and output terminals on a single side (cable cross‑section up to 1.5 mm²).
Cable clamp included for cables with a diameter of min. 3 mm – max. 8 mm.
Notes
For the minimum and maximum quantities of luminaires that can be connected to this power supply, please refer to the instruction sheet of the relevant luminaire.
Compatible products
This accessory can be used with the following products