.jpg)
MY04
Colour
Technical Data
last update: 30/03/2026Description
35 W 0/1-10V dimmable electronic power supply. Input Vin=220÷240 Vac 50÷60 Hz. Constant current output I=500 mA, SELV.
Accepts 0-10V and 1-10V type regulation. For connection to control units, consider a sink current of 1 mA. For connection to potentiometers, consider a value of 100 kOhm.
The product features include overvoltage protection, short circuit protection, overcurrent and over-temperature protection.
Dimensions
General (mm)
124x79x22
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.09
Product certification
-
EAC
Electrical data
Maximum number of luminaires of this type per minature circuit breaker
B10A: 9 power supply units
B16A: 15 power supply units
C10A: 15 power supply units
C16A: 25 power supply units
B10A: 9 power supply units
B16A: 15 power supply units
C10A: 15 power supply units
C16A: 25 power supply units
Overvoltage protection
4kV Common mode & 4kV Differential mode
Inrush current
20 A / 400 µs
Power Supply
Electronic Driver included
Mounting options
Integral
Control
0-10V
Frequency
0/50/60 Hz
Installation
Description
Remote installation - provided with slots for fixing with screws.;
Wiring
Input and output terminals on one side only (cable section up to 1.5 mm2).
Cable clamp included for cables with diameter: min. 3 mm - max. 8 mm.
Notes
To check the minimum and maximum quantities of devices that can be connected to the power supply and to find out whether the wiring can take place from the recessed hole or from a remote location, refer to the lighting fixture instruction sheet.
Compatible products
This accessory can be used with the following products