.jpg)
MY06
Colour
Technical Data
last update: 30/03/2026Description
15 W phase-cut dimmable electronic power supply. Input Vin=220÷240 Vac 50÷60 Hz. Constant current output I=500 mA, SELV.
Accepts Trailing/Leading-edge type regulation.
The type of dimmer that will be used must be tested by the customer to verify its correct functioning with this driver. Contact iGuzzini for further information.
The product features include overvoltage protection, short circuit protection, overcurrent and over-temperature protection.
Dimensions
General (mm)
102x51x29
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.09
Product certification
-
EAC
Electrical data
Maximum number of luminaires of this type per minature circuit breaker
B10A: 50 power supply units
B16A: 80 power supply units
C10A: 83 power supply units
C16A: 136 power supply units
B10A: 50 power supply units
B16A: 80 power supply units
C10A: 83 power supply units
C16A: 136 power supply units
Overvoltage protection
2kV Common mode & 1kV Differential mode
Inrush current
1.7 A / 40 µs
Minimum dimming
5
Power Supply
Electronic Driver included
Mounting options
Integral
Control
Phase cut
Frequency
50/60 Hz
Installation
Description
Equipped with slots for possible fixing with screws.;
Wiring
Input and output terminals on one side only (cable section up to 1.5 mm2.)
Cable clamp included for cables with diameter: min. 3 mm - max. 8 mm.
Notes
To check the minimum and maximum quantities of devices that can be connected to the power supply and to find out whether the wiring can take place from the recessed hole or from a remote location, refer to the lighting fixture instruction sheet.
Compatible products
This accessory can be used with the following products