P823
Colour
Optional accessories
Technical Data
last update: 07/11/2025Description
Outdoor luminaire with a Wide Flood optic, designed to use LED lamps. Made up of an optical assembly with a base and an aluminium alloy frame. The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. With a 5 mm thick colourless transparent tempered sodium-calcium glass cover. The product can be tilted by +5°/-90° around the vertical plane with a 10° step graduated gauge and fitted with mechanical blocks that guarantee stable aiming of the beam of light. Horizontal aiming is performed using the slots in the base, which allow an ±30° adjustment.
High visual comfort. Polymer optic lenses offering high yield and even light distribution. Complete with circuit fitted with Warm White monochrome power LEDs. Extractable control gear connected with quick-coupling connectors. 220-240V ac 50/60Hz DALI electronic ballast. Replaceable control gear. All the screws used are made of A2 stainless steel.
Dimensions
General (mm)
406x276
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
8.55
Material
Die-cast aluminium
Product certification
-
BIS -
CE -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
7155.82
W system
82.7
lm source
9550
W source
76
Luminous efficiency - lm/W (system value)
86.53
lm in emergency mode
-
Light output ratio (LOR)
75
Optic and beam angle
WF - Wide Flood 46°
Adjustability
directional
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 94
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
76,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Inrush current
102 A / 106 µs
Minimum dimming
10
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Dimmable option
Dimmable
Control
DALI-2
Installation
Description
The luminaire can be installed at ground level or on walls using the standard base.;
Mounting
Wall arm, Wall surface, Ground anchored
Wiring
Luminaire ready for pass-through wiring. Product perfect watertightness at the power cable entry point is guaranteed by 2 nickel-plated brass M24x1.5 cable clamps, suitable for cables with a max external 16mm ø (1.5mm² cross section). Push in terminal board.
Notes
Available accessories include: a refractor for elliptical light flow distribution, diffusing glass, visor, directional flaps, protective grille .