P857
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Outdoor luminaire with an Elliptical optic, designed to use LED lamps. Made up of an optical assembly, base and all glass finish with black serigraphy to add extra style The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. With a 5 mm thick colourless transparent tempered sodium-calcium glass cover. The product can be tilted by +5°/-90° around the vertical plane with a 10° step graduated gauge and fitted with mechanical blocks that guarantee stable aiming of the beam of light. Horizontal aiming is performed using the slots in the base, which allow an ±30° adjustment.
High visual comfort. Polymer optic lenses offering high yield and even light distribution. Complete with circuit fitted with Warm White monochrome power LEDs. Extractable control gear connected with quick-coupling connectors. 220-240V ac 50/60Hz DALI electronic ballast. Replaceable control gear. All the screws used are made of A2 stainless steel.
Dimensions
General (mm)
406x276
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
8.55
Material
Die-cast aluminium
Product certification
-
BIS -
ENEC-03 -
QCERT
Photometric data
Details
lm system
4449.21
W system
55.4
lm source
6450
W source
51
Luminous efficiency - lm/W (system value)
80.31
lm in emergency mode
-
Light output ratio (LOR)
69
Optic and beam angle
E - Elliptical
Adjustability
directional
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 94
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L80 - B10 (Ta 25°C)
Lifetime LED 2
87,000h - L80 - B10 (Ta 40°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Dimmable option
Dimmable
Control
DALI
Installation
Description
The luminaire can be installed at ground level or on walls using the standard base.;
Mounting
Wall arm, Wall surface, Ground anchored
Wiring
Luminaire ready for pass-through wiring. Product perfect watertightness at the power cable entry point is guaranteed by 2 nickel-plated brass M24x1.5 cable clamps, suitable for cables with a max external 16mm ø (1.5mm² cross section). Push in terminal board.
Notes
Available accessories include: a refractor for elliptical light flow distribution, diffusing glass, visor, directional flaps, protective grille .