PA66
Colour
Technical Data
last update: 21/10/2025Description
Complete Bluetooth-DALI interface kit for Quick BLE system to insert in iN 60 and iN 90 modules (MMO modules excluded). Operates with the Smart Light Control app -
Input voltage 220-240 Vac -
Power: 1 W (typical) ; 3 W (in transmission) -
Frequency: 50/60 Hz -
Inrush current: 20A -
Dimming curve: linear and logarithmic; 0-100% -
Controls up to 4 DALI drivers for iN 60 or iN 90 modules -
Bluetooth Low Energy Frequency: 2.4 GHz - BLE 5.2 -
Transmission power: 8 dBm (typical) -
Operation in mesh network-
Update via OTA (over the air) -
Operating temperature: -20 +50 °C -
Integrated beacon that can be activated -
Protocols: AltBeacon, iBeacon and Eddystone
Dimensions
General (mm)
94x49x30
Technical performance
Complies with EN60598-1 and pertinent regulations
Product certification
-
CE -
UK Conformity Assessed
Electrical data
Power Supply
Electronic Power supply included
Mounting options
Integral
Control
Bluetooth WiSilica
Installation
Description
Inside iN 60 and iN 90 modules, operates a maximum of 4 drivers. To define the number of interfaces correctly, check the number of drivers in each iN 60 or iN 90 module (MMO modules excluded).;
Wiring
Souriau-type quick-coupling connector. The interface kit is clipped onto the end of the pass-through wiring already present on the iN 60 or iN 90 module. The iN 60 or iN 90 module connector used by the interface kit does not allow the pass-through wiring to connect up to the next module, so an extra power supply point will be required for the following modules (like a wiring plate or a pendant mounting kit with a cable every 4 modules)
Notes
Maximum distance between iN 60 or iN 90 modules with BLE-DALI interface: 8m.
Maximum distance between iN 60 or iN 90 modules with BLE-DALI interface and smartphone: 8 m.
The maximum distance is affected by physical obstacles, like concrete walls, metal panels and the availability of linear systems.