PA87
Colour
Technical Data
last update: 25/11/2025Description
Constant current non dimmable electronic ballast 22W. Vin=220-240Vac - 50/60 Hz - Iout =1050 mA. Maximum no-load voltage 23 Vdc, SELV.
Dimensions
General (mm)
122x38x28
Technical performance
Complies with EN60598-1 and pertinent regulations
Installation
Description
Located in an electrical junction box. If installed outdoors it must be protected by a suitable IP box.;
Wiring
Input and output terminals on one side only, maximum cable cross-section 2.5 mm2 (recommended 1.5 mm2). Primary and secondary cable clamp for cables with a diameter of min 3 mm - max 6 mm.
Notes
Ballast can be secured by inserting screws through the slots.
Compatible products
This accessory can be used with the following products