PA98
Colour
Technical Data
last update: 25/11/2025Description
"Slim" type constant voltage 24 Vdc electronic ballast with a maximum power of 13 W. It can be powered from 1 to n Quick-BLE multi-sensors and Blade R multi-sensors. For the maximum number of multi-sensors that can be connected in parallel, consult the instruction sheet.
Protected against short circuits, mains overvoltages and overloads.
For codes PA62, PA88, PB06, PB07.
Dimensions
General (mm)
158x22x19
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.05
Product certification
-
ENEC pending
Electrical data
Inrush current
27 A / 250 µs
Power Supply
Electronic Power supply included
Mounting options
Integral
Control
On/off
Installation
Description
Ballast protection rating: IP20. Complete with slots at the top and bottom for installation.
When connected to the recessed multi-sensors PA88, PB06 and PB07, the driver is passed through the product installation hole. For the ceiling-mounted multi-sensor PA62, a remote position is required.;
Wiring
2 primary conductors (L/N) and 2 secondary conductors (+/- 24 V). Device can take cables with a cross-section of up to 1.5 mm2, and the cable clamp can fit cross-sections of between 3 and 8 mm.
The sensors are connected in parallel. Maximum connection distance 10 m.
Notes
Complete with terminal covers and cable clamps at top and bottom, the device can be installed freely above a false ceiling.
Compatible products
This accessory can be used with the following products