Region and Language

Product standard

Your language

PC42

Downloads

Colour

Technical Data

last update: 01/04/2026
Description
DALI dimmable electronic power supply with constant current I=550 mA 10 W. Input Vin=220÷240 Vac 50÷60 Hz. SELV output. Product features include short circuit protection, overcurrent and over-temperature protection.
Dimensions
General (mm) 166x30x22
Technical performance
  • Class II

    Class II

  • Protected against penetration of solids larger than 12 mm, not protected against penetration of liquids.

    Protected against penetration of solids larger than 12 mm, not protected against penetration of liquids.

Complies with EN60598-1 and pertinent regulations

Physical properties
Weight (kg) 0.05
Product certification
  • EAC
    EAC
  • BIS pending
    BIS pending
  • CCC Pending
    CCC Pending
  • ENEC pending
    ENEC pending

Electrical data

Maximum number of luminaires of this type per minature circuit breaker
B10A: 81 power supply units
B16A: 130 power supply units
C10A: 135 power supply units
C16A: 221 power supply units
Overvoltage protection 2kV Common mode & 1kV Differential mode
Inrush current 5 A / - µs
Minimum dimming 1
Power Supply Electronic Driver included
Mounting options Integral
Control DALI-2
Frequency 0/50/60 Hz

Installation

Description

Equipped with slots for possible fixing with screws.;
Wiring Opposite input and output terminals (cable section up to 1.5 mm2.) Cable clamp on primary+DALI and secondary.

Notes

To verify the minimum and maximum quantities of devices that can be connected to the power supply and to know if the wiring can take place from the recessed hole or from a remote location, refer to the instruction sheet of the lighting device.

Compatible products

This accessory can be used with the following products

Subscribe