PG04
Colour
Technical Data
last update: 27/11/2025Description
Complete module with Organic Response wireless multi-sensor node, with lux and motion detector. Wirepas technology, Bluetooth, infrared communication and PIR.
The Organic Response module allows the iN60 Evo lighting module to which it is combined to automatically communicate with other nearby lighting modules equipped with an Organic Response sensor node in mesh mode.
For advanced features such as daylight control and modification of operating parameters, you can use the Organic Response app available on the App Store and Play Store.
Accessories such as BLE buttons, dongles and gateways are available for system architectures connected to the Organic Response Portal with which you can take advantage of additional sensor functions such as Analytics, including information on space occupancy and energy consumption.
Wireless frequency 2.4 GHz / IR 38 kHz.
Wireless security standard: AES-128.
Integrated beacon that can be activated via the Organic Response Portal (iBeacon protocol).
Complete module with 220-240 V mains voltage DALI power supply.
Based on the wiring options (see wiring section), the module can be used both in Plug & Play mode and as configurable master/slave for continuous lines.
Dimensions
General (mm)
100x60
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Thermoplastic
Product certification
-
CE -
UK Conformity Assessed
Electrical data
Power Supply
Electronic Driver included
Mounting options
Integral
Control
Organic Response Technology
Installation
Description
Clip-in installation on dedicated profiles of the iN60 Evo OPAL/MPO range for recessed, ceiling and suspended mounting. Installation can take place at the beginning, end and in an intermediate position of an iN60 Evo composition.
Minimum positioning height 2.7 m / max 3.7 m. Distance between sensors min 1.0 m / max 3.0 m. For lower positioning heights (e.g.. 2.4 m) or greater distances between the sensors, contact iGuzzini.
Typical motion sensor coverage surface diameter: 4.8 m (@ 2.7 m installation h).;
Wiring
The sensor module is equipped with quick connectors for easy installation and is powered by the internal wiring of the iN60 Evo OPAL/MPO device to which it is attached.
The module wiring allows 3 options:
-1) Slave/repeater module - sensor output disconnected from the DALI line: the control of the lighting modules of the iN60 Evo line section will be managed by another master module with sensor. Programming the system with the app is necessary and some personalities will not be usable.
-2) Master module - sensor output connected to the DALI line upstream or downstream of the sensor module - the control of the lighting modules of the line downstream or upstream will be managed directly by the Organic Response sensor module. Programming with the app may be necessary and some personalities may not be usable.
-3) Master module - sensor output connected to the DALI line both upstream and downstream of the sensor module - the control of the lighting modules of the line both downstream and upstream will be managed directly by the Organic Response sensor module. Programming with the app may be necessary and some personalities may not be usable.
The DALI line managed by an Organic Response sensor module must not be connected to DALI lines managed by other Organic Response sensor modules. Consult the instruction sheet for further reference or contact iGuzzini for system configuration.
Notes
Plug&Play Default Values (modifiable by app):
-Maximum light level when present (max light): 100%
-Wait before switching to low light level (dwell time): 10 min
-Low light level (low light): 10%
-Time at low light level (low light time): 10 min
-Minimum light value after low light time (min light): 0% (OFF)
-Daylight control: disabled
-Personality: Open Floor (100,100, 70, 40, 10)
The IR dongle X687 and the gateway X685 are required to connect to the Organic Response portal.
Compatible products
This accessory can be used with the following products