PG05
Colour
Technical Data
last update: 27/11/2025Description
Complete DALI-2 sensor module for compatible DALI-2 control systems.
The sensor detects movement (PIR) and illuminance value.
Power is supplied via the DALI line of the iN60 Evo (9 mA absorption).
Illuminance dynamic range: 1 - 2000 lx.
Motion detection angle 84°.
Detection angle for light measurement 30° - 60° (asymmetrical).
Supplied with accessory shutter that prevents detection from a specific direction, which can be installed if necessary.
The sensor detects movement (PIR) and illuminance value.
Power is supplied via the DALI line of the iN60 Evo (9 mA absorption).
Illuminance dynamic range: 1 - 2000 lx.
Motion detection angle 84°.
Detection angle for light measurement 30° - 60° (asymmetrical).
Supplied with accessory shutter that prevents detection from a specific direction, which can be installed if necessary.
Dimensions
General (mm)
100x60
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Thermoplastic
Electrical data
Power Supply
Electronic Driver not included
Mounting options
Remote
Control
DALI-2 sensor
Installation
Description
Clip-in installation on dedicated profiles of the iN60 Evo OPAL/MPO range for recessed, ceiling and suspended mounting. Installation can take place at the beginning, end and in an intermediate position of an iN60 Evo System. Mounting height min 2.4 m / max 4 m for motion and max 3 m as lux + motion sensor. Refer to the instruction sheet for permitted positions.
Example of motion coverage surface diameter: 4.3 m @ h2.4 m installation.;
Example of motion coverage surface diameter: 4.3 m @ h2.4 m installation.;
Wiring
The sensor module is equipped with quick connectors for easy installation and is powered by the internal wiring of the iN60 Evo OPAL/MPO device to which it is attached.
The sensor module and the related iN60 Evo devices must be managed by a compatible DALI-2 control system in which an application controller must be present. Contact iGuzzini for any reference.
Notes
DALI EN 62386-101 ed.2. The sensor used is certified DALI-2 parts 101, 103, 301, 303, 304.
Occupancy sensor DALI part 303: instance 0
Light sensor DALI part 304: instance 1
Occupancy sensor DALI part 303: instance 0
Light sensor DALI part 304: instance 1
Compatible products
This accessory can be used with the following products