PG32
Colour
Technical Data
last update: 27/11/2025Description
Complete DALI-2 sensor module for compatible DALI-2 control systems.
The sensor detects movement (PIR) and illuminance value.
Power is supplied via the DALI line of the iN60 Evo (9 mA absorption).
Illuminance dynamic range: 1 - 2000 lx.
Motion detection angle 84°.
Detection angle for light measurement 30° - 60° (asymmetrical).
Supplied with accessory shutter that prevents detection from a specific direction, which can be installed if necessary.
Dimensions
General (mm)
100x60
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Thermoplastic
Electrical data
Power Supply
Electronic Driver not included
Mounting options
Remote
Control
DALI-2 sensor
Installation
Description
Clip-in installation on dedicated profiles of the iN60 Evo Space/MMO range for recessed, ceiling and suspended mounting. Installation can take place at the beginning, end and in an intermediate position of an iN60 Evo System. Mounting height min 2.4 m / max 4 m for motion and max 3 m as lux + motion sensor. Refer to the instruction sheet for permitted positions. Example of motion coverage surface diameter: 4.3 m @ h2.4 m installation.;
Wiring
The sensor module is equipped with a terminal block and is powered by the wiring required for the iN60 Evo Space/MMO device to which it is attached.
The sensor module and the related iN60 Evo devices must be managed by a compatible DALI-2 control system in which an application controller must be present. Contact iGuzzini for any reference.
Notes
DALI EN 62386-101 ed.2. The sensor used is certified DALI-2 parts 101, 103, 301, 303, 304.
Occupancy sensor DALI part 303: instance 0
Light sensor DALI part 304: instance 1
Compatible products
This accessory can be used with the following products