Q370
Colour
Optional accessories
Technical Data
last update: 21/10/2025Description
Initial profile in extruded aluminium - Minimal (frameless) version for flush with ceiling mounting and up-down emission; methacrylate opal lower screen (diffused general light); screen set up for connecting several lengths by overlapping. Methacrylate diffusing screen for upper emission. Light flow split into approx. 70% down / 30% up.
Dimensions
General (mm)
3594x91x105
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
8.5
Material
Aluminium and technopolymer
Product certification
-
QCERT
Photometric data
Details
lm system
17384.83
W system
182.7
lm source
26750
W source
160
Luminous efficiency - lm/W (system value)
95.16
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
5151
Light output ratio (LOR)
65
Optic and beam angle
GL - general lighting
Light colour quality
CRI (minimum) 80
Colour temperature
4000 K
MacAdam Step
3
Lifetime LED 1
> 50,000h - L80 - B10 (Ta 25°C)
Electrical data
ZVEI code
LED
Installation
Description
Installation can be pendant-mounted using suitable accessories to be ordered separately. The initial modules can be used individually for various applications if completed with accessory caps and the required LED module.;
Mounting
Wall surface, Ceiling pendant
Wiring
Set up to house the up-down LED modules required by the system.
Notes
Take care with the system configuration. To make continuous lines of lighting, use the intermediate modules. To complete a continuous line correctly there must always be an initial module at the start or end of the composition.