QK59
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Technical Data
last update: 02/12/2025Description
Recessed luminaire with fixed wall washer optic for LED lamp. Passive heat dissipation system. Lamp body with die-cast aluminium radiant surface, flush with ceiling version (frameless). For recessed installation in a false ceiling a specific adapter is required that is available with a separate item code. Asymmetrical optic system designed to achieve a highly defined light distribution on walls and eliminate any shadow zones between the wall and the ceiling. Superpure aluminium reflector/flux enhancer - PMMA screen/refractor and thermoplastic holding structure. Supplied with a dimmable DALI ballast unit connected to the luminaire.
Dimensions
General (mm)
119x119x109
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.7
Material
Die-cast aluminium and thermoplastic
Product certification
-
BIS -
CCC S&E -
CE -
ENEC-03 -
NOM -
QCERT
Photometric data
Details
lm system
1858.19
W system
23.2
lm source
3150
W source
20
Luminous efficiency - lm/W (system value)
80.09
lm in emergency mode
-
Light output ratio (LOR)
59
Optic and beam angle
WW - Wall Washer
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 83 - Rg (Gamut Index) 94
Colour temperature
4000 K
MacAdam Step
2
Lifetime LED 1
> 50,000h - L90 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic Driver included
Mounting options
Remote
Dimmable option
Dimmable
Control
DALI-2
Installation
Description
The luminaire is recessed in the specific adapter (QK71) by means of a steel wire spring, previously installed on the ceiling that can be between 12.5 and 25 mm thick. Installation possible in a horizontal position. To light walls correctly check the installation distances and centre-to-centre distances indicated on the instructions sheet.;
Mounting
Ceiling recessed
Wiring
Quick-coupling connections on the ballast unit. Digital electronic cabling that allows dimming to be performed with DALI protocol or a pushbutton switch (read the indications on the instruction sheet carefully).
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessories