.jpg)
QK60
Colour
Technical Data
last update: 09/02/2026Description
Recessed luminaire with fixed wall washer optic for LED lamp. Passive heat dissipation system. Lamp body with die-cast aluminium radiant surface, flush with ceiling version (frameless). For recessed installation in a false ceiling a specific adapter is required that is available with a separate item code. Asymmetrical optic system designed to achieve a highly defined light distribution on walls and eliminate any shadow zones between the wall and the ceiling. Superpure aluminium reflector/flux enhancer - PMMA screen/refractor and thermoplastic holding structure. Supplied with a dimmable DALI ballast unit connected to the luminaire.
Dimensions
General (mm)
119x119x109
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.7
Material
Die-cast aluminium and thermoplastic
Product certification
-
BIS -
CCC S&E -
CE -
EAC -
ENEC-03 -
NOM -
QCERT
Photometric data
Details
lm system
2035.16
W system
32
lm source
3450
W source
28
Luminous efficiency - lm/W (system value)
63.6
lm in emergency mode
-
Maximum intensity (cd)
1370
Light output ratio (LOR)
59
Optic and beam angle
WW - Wall Washer
Adjustability
fixed
Light colour quality
CRI 90 - Rf (Colour Fidelity Index) 92 - Rg (Gamut Index) 99
Colour temperature
3000 K
MacAdam Step
2
Lifetime LED 1
> 50,000h - L90 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic Driver included
Mounting options
Remote
Dimmable option
Dimmable
Control
DALI-2
Installation
Description
The luminaire is recessed in the specific adapter (QK71) by means of a steel wire spring, previously installed on the ceiling that can be between 12.5 and 25 mm thick. Installation possible in a horizontal position. To light walls correctly check the installation distances and centre-to-centre distances indicated on the instructions sheet.;
Mounting
Ceiling recessed
Wiring
Quick-coupling connections on the ballast unit. Digital electronic cabling that allows dimming to be performed with DALI protocol or a pushbutton switch (read the indications on the instruction sheet carefully).