.jpg)
QY40
Colour
Optional components
Technical Data
last update: 10/01/2026Description
LED emergency lighting luminaire with diffuser optic. Can be surface-mounted or semi-recessed with accessory box. 1.5 h autonomy with 12 h recharging time for maximum capacity. Self-extinguishing (UL94) polycarbonate body.
Supplied with frame for a body-flush aesthetic when the luminaire is surface-mounted.
Self-test function operated by a micro-controller and feedback via a twin-colour LED.
Test function for local tests that are activated by pressing a specific point on the luminaire.
Built-in red/green LEDs for indicating various device states: OK/Test in progress/Battery disconnected/Device faulty.
Latest generation LiFePO4 (Lithium Iron Phosphate) 6.4V 1.5 Ah battery.
Power in non maintained mode: 0.5 W -
Power in maintained mode: 3.2 W -
Test module and centralised on/off command available on request for 150 or 250 luminaires (for this function further cabling with 2 conductors is required)
Dimensions
General (mm)
301x127x46
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Thermoplastic
Product certification
-
CE -
ENEC-03
Photometric data
Details
lm system
150
W system
3.2
lm source
W source
Luminous efficiency - lm/W (system value)
46.88
lm in emergency mode
-
Maximum intensity (cd)
58
Light output ratio (LOR)
100
Optic and beam angle
GL - general lighting
Adjustability
fixed
Light colour quality
CRI 80
Colour temperature
5000 K
Lifetime LED 1
> 50,000h - L70 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
220 - 240
ZVEI code
LED
Power Supply
Electronic with inverter Driver included
Mounting options
Integral
Installation
Description
Surface-mounted or semi-recessed with accessory box. The control electronics and batteries are housed inside the luminaire.;
Mounting
Wall surface
Wiring
Fitted with 4 elastomer membranes that can be opened if required. If external use cables or tubes with connectors are used a protection rating of IP65 is maintained.
Option of a lateral or upper inlet/outlet via 16 mm tubes (up to 20 mm with adapter not included). Push-type terminal board for 1.5 to 2.5 mm2 cross-section cables.
2 cabling options: non maintained (SE) or maintained (SA) or switchable maintained with switch. Cannot be used as a general lighting luminaire.
Notes
Box for recessing luminaire in masonry for a final semi-recessed effect is available as an accessory.
CCT 5000K (4750÷6000K)
CCT 5000K (4750÷6000K)