R395
Colour
Optional accessories
Technical Data
last update: 01/12/2025Description
direct emission modular lighting system with LED lamps. Module for general lighting (Low Contrast) specifically for continuous line. Minimal (frameless) version extruded aluminium single length profile; polycarbonate screen for diffused general light in compliance with the TP(a) standard set up for connection to other modules by overlapping; mechanical systems for connection between modules included in the package. Installation can be recessed, surface-mounted (ceiling/wall), or pendant. The module must be completed with the accessories kit needed for the selected type of installation. DALI dimmable electronic control gear integrated in the luminaire. Warm white high efficiency LED.
Dimensions
General (mm)
1197x32x75
Shape
Rectangular
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
2.13
Material
Aluminium and technopolymer
Product certification
-
BIS -
CE -
ENEC-03 -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
1740.24
W system
20.3
lm source
2450
W source
16
Luminous efficiency - lm/W (system value)
85.73
lm in emergency mode
-
Total light flux at or above an angle of 90° (Lm)
1
Light output ratio (LOR)
71
Optic and beam angle
GL - general lighting
Adjustability
fixed
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 86 - Rg (Gamut Index) 96
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
50,000h - L80 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Inrush current
13.6 A / 304 µs
Voltage
230
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Dimming mode
CCR
Dimmable option
Dimmable
Control
DALI
Installation
Description
pendant: complete with power supply unit with cable (MWG5) and suspension cables (MWG6); surface-mounted: complete with supports (MWG7); recessed: after making the preparation slot, use the special supports to install in the false ceiling (MWG8).;
Mounting
Ceiling recessed, Ceiling surface, Ceiling pendant
Wiring
the module is fitted with 5-pin terminal blocks for pass-through wiring at the ends; the accessory power supply unit code MWG5 has a fixing plate with 5-pin terminal block for connection to the main power supply. DALI dimmable control gear integrated in the module.
Notes
the intermediate modules are specifically for continuous line installation. To correctly complete a continuous line, always use an initial module at the start or end of the structure. Possibility of combined Low Contrast / High Contrast.