RA86
Colour
Optional accessories
Technical Data
last update: 12/11/2025Description
Linear miniaturised recessed luminaire with 2 optical elements for LED lamps - fixed optic. Despite the ultracompact size of the product, the patented technology of the optic system guarantees an efficient luminous flux and a high level of controlled glare visual comfort. Main body with die-cast zamak radiant surface, minimal (frameless) version for mounting flush with the ceiling. For recessed installation in a false ceiling a specific adapter is required that is available with a separate item code. Metallised, thermoplastic, high definition Opti Beam reflector, integrated in a set-back position in the anti-glare screen. Ballast not included, available with separate code.
Dimensions
General (mm)
36x22x49
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.08
Material
Die-cast zamak and technopolymer
Product certification
-
BIS -
CE -
ENEC-03 -
PEP Ecopassport -
QCERT
Photometric data
Details
lm system
320
W system
4
lm source
400
W source
4
Luminous efficiency - lm/W (system value)
80
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
F - Flood 42°
Adjustability
fixed
Light colour quality
CRI (minimum) 90 - Rf (Colour Fidelity Index) 93 - Rg (Gamut Index) 99
Colour temperature
3500 K
MacAdam Step
2
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
100,000h - L90 - B10 (Ta 40°C)
Electrical data
Operating ambient temperature range
da -15°C a 40°C.
ZVEI code
LED
Installation
Description
The luminaire is recessed in the specific adapter (QJ87) by means of a steel wire spring, previously installed on the ceiling that can be 12.5 / 15 / 20 mm thick. A special protective sheath allows finishing operations on the plasterboard to be simplified and speeded up.;
Mounting
Wall recessed, Ceiling recessed
Wiring
Constant current ballasts to be ordered separately: ON-OFF - code no. MXF9 (min 1 / max 4); dimmable DALI - code no. BZM4 (min 1 / max 10) - check the instruction sheet for the lengths and compatible cross-sections of the cables to be used.
Notes
The special steel wire spring provided is required to facilitate the eventual extraction of the recessed body once it has been inserted.