S152
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional accessories
Technical Data
last update: 21/10/2025Description
Spotlight designed to use LED lamps and an STCy0.5 optic. Consists of a die-cast aluminium optical assembly, steel brackets (both a bracket for the spotlight and a bracket for handle/pole application) and a clear, tempered sodium-calcium safety glass cover. It is fitted with an A2 stainless steel cable gland and a 2x1mm2 section 05RN-F cable. The optical assembly can be adjusted on a horizontal plane at an angle between -50° / +90°. Agorà is fitted with a graduated scale and mechanical locking device for positioning. The street optics system comes complete with a Warm White monochrome LED circuit. The DALI electronic power supply is remote and can be ordered separately to allow the spotlights to be connected in series. Compatible with programming systems via DALI terminals or an NFC system. The spotlight is fitted with a protection system that in the event of a fault allows all the other products in the same circuit to operate normally. Constant current IP67 class I power supply units must be used (all the information is in the instruction sheet). All external screws used are made of A2 stainless steel.
Dimensions
Diameter (mm)
ø254
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
3.6
Material
Aluminium
Product certification
-
BIS -
CE -
ENEC-03 -
PEP Ecopassport -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
2710 - 3450
W system
25.5 - 33.4
lm source
W source
Luminous efficiency - lm/W (system value)
103.29
lm in emergency mode
-
Light output ratio (LOR)
100
Optic and beam angle
STCy0.5 - I = 3.7h - d = 0.5 - Intensity Class: G*3
Adjustability
rotation
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 85 - Rg (Gamut Index) 97
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Charts and polar curves
Electrical data
Operating ambient temperature range
da -30°C a 35°C.
ZVEI code
LED
Power Supply
Electronic Power supply not included
Mounting options
Remote
Control
DALI-2
Installation
Description
Floor, ceiling, wall or pole-mounted installation.;
Mounting
Wall surface, Ceiling surface, Free standing
Wiring
A2 stainless steel cable gland.
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessories