.jpg)
SN96
Colour
Optional accessories
Technical Data
last update: 29/01/2026Description
Direct light lighting fixture, designed for the use of RGB LED light sources, 48Vdc DMX512-RDM dimmable with search and addressing function. Installation on ceiling, wall or support. Consisting of body and supports for installation to be ordered separately. Made of extruded aluminium body, with die-cast aluminium end caps complete with silicone gaskets and subjected to a multi-step pre-treatment process, in which the main phases are degreasing, fluorozirconation (surface protective layer) and sealing (nano-structured silane layer). The subsequent painting phase is carried out with primer and liquid acrylic paint, baked at 150°, which provides high resistance to atmospheric agents and UV rays. Optical compartment closed at the top by a 3mm thick transparent glass screen fixed with silicone. Complete with RGB power multiled plate and 48Vdc DMX512-RDM electronic driver (power supply to be ordered separately). Supplied with double PG11 and outgoing cables for pass-through wiring with IP68 male/female connectors. Equipped with PMMA diffusing filter and optics with plastic (methacrylate) lens for Flood lighting. All external screws used are made of A2 stainless steel. The technical characteristics of the luminaires comply with EN 60598-1 and specific standards.
Dimensions
General (mm)
611x47x83
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.8
Material
Aluminium
Product certification
-
BIS -
EAC
Photometric data
Details
lm system
804.6
W system
30
lm source
1490
W source
26
Luminous efficiency - lm/W (system value)
26.82
lm in emergency mode
-
Maximum intensity (cd)
1363
Light output ratio (LOR)
54
Optic and beam angle
F - Flood
Adjustability
fixed
Colour temperature
RGB K
Lifetime LED 1
75,000h - L80 - B10 (Ta 25C)
Lifetime LED 2
74,000h - L80 - B10 (Ta 40C)
Electrical data
Operating ambient temperature range
from -30°C to 50°C.
Voltage
48 V DC
ZVEI code
LED
Power Supply
Electronic Control card included Electronic Power supply not included
Mounting options
Integral
Control
DMX-RDM
LED current (mA)
0.5
Installation
Description
For installation available as accessories adjustable wall arms in AISI304 stainless steel.;
Mounting
Wall arm, Wall surface, Ceiling surface
Wiring
Complete with DMX-RDM control board 48÷52Vdc. The product is supplied with double PG11 nickel-plated brass cable gland with outgoing 05RN-F 2x1.5mm²+3x0.35mm² rubber cables for pass-through wiring with connectors (illegible part). For electrical connection and DMX-RDM control available: IP68 5-pole female connector, IP68 5-pole male connector + closing cap (BZI6), IP68 5-pole male connector + female connector.
Notes
Product complete with LED lamp. DMX specifications require the insertion of a 120 ohm termination resistor to be inserted between the DATA+ and DATA- cables of the last product in the line (BZQ7).