ST10
Colour
Optional accessories
Technical Data
last update: 01/12/2025Description
Direct light lighting fixture, designed for the use of RGB LED light sources, 48Vdc DALI dimmable with search and addressing function. Installation on ceiling, wall or support. Consisting of body and supports for installation to be ordered separately. Made of extruded aluminium body, with die-cast aluminium end caps complete with silicone gaskets and subjected to a multi-step pre-treatment process, in which the main phases are degreasing, fluorozirconation (surface protective layer) and sealing (nano-structured silane layer). The subsequent painting phase is carried out with primer and liquid acrylic paint, baked at 150°, which provides high resistance to atmospheric agents and UV rays. Optical compartment closed at the top by a 3mm thick transparent glass screen fixed with silicone. Complete with RGB power multiled plate and 48Vdc DALI electronic driver (power supply to be ordered separately). Supplied with double PG11 and outgoing cables for pass-through wiring with IP68 male/female connectors. Equipped with optics with plastic (methacrylate) lens for Flood lighting. All external screws used are made of A2 stainless steel. The technical characteristics of the luminaires comply with EN 60598-1 and specific standards.
Dimensions
General (mm)
611x47x77
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
1.8
Material
Aluminium
Product certification
-
BIS -
CCC Pending -
ENEC pending
Photometric data
Details
lm system
804.6
W system
29.6
lm source
1490
W source
26
Luminous efficiency - lm/W (system value)
27.18
lm in emergency mode
-
Light output ratio (LOR)
54
Optic and beam angle
F - Flood
Adjustability
fixed
Colour temperature
RGB K
Lifetime LED 1
75,000h - L80 - B10 (Ta 25C)
Lifetime LED 2
74,000h - L80 - B10 (Ta 40C)
Electrical data
Operating ambient temperature range
da -30°C a 50°C.
Voltage
48 V DC
ZVEI code
LED
Power Supply
Electronic Electronic Control card Power supply included not included
Mounting options
Integral
Control
DALI
Installation
Description
For installation available as accessories adjustable wall arms in AISI304 stainless steel.;
Mounting
Wall arm, Wall surface, Ceiling surface
Wiring
Complete with DALI control board 44÷52Vdc. The product is supplied with double PG11 nickel-plated brass cable gland with outgoing 05RN-F 2x1.5mm²+3x0.35mm² rubber cables for pass-through wiring with connectors. For electrical connection and DALI control available: IP68 4-pole female connector, IP68 4-pole male connector + closing cap, IP68 4-pole male connector + female connector.
Notes
Product complete with LED lamp.