UH83
Colour
Required accessories
It is necessary to order one of the required accessories to properly install and operate the product:
Optional accessories
Technical Data
last update: 18/11/2025Description
Spotlight designed to use LED lamps and a Spot optic. Consists of a die-cast aluminium optical assembly, steel brackets (both a bracket for the spotlight and a bracket for handle/pole application) and a clear, tempered sodium-calcium safety glass cover. It is fitted with an A2 stainless steel cable gland and a 2x1mm2 section 05RN-F cable. The optical assembly can be adjusted on a horizontal plane at an angle between -50° / +90°. Agorà is fitted with a graduated scale and mechanical locking device for positioning. The Opti Beam Lens optical system comes complete with a Warm White monochrome LED circuit. The electronic DALI ballast is remote and can be ordered separately to allow the spotlights to be connected in series. The spotlight is fitted with a protection system that in the event of a fault allows all the other products in the same circuit to operate normally. Class I, IP67 rated power supply units must be used (all the necessary information is included in the instruction sheet). Both indoor (diffuser glass covers, lamellar louvers and refractors for elliptical light) and outdoor accessories (cylindrical screens, visors and protective grilles) can be used. All external screws used are made of A2 stainless steel.
Dimensions
General (mm)
72x363
Diameter (mm)
ø313
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
5.72
Product certification
-
BIS -
CE -
ENEC-03 -
PEP Ecopassport -
QCERT -
UK Conformity Assessed
Photometric data
Details
lm system
6699 - 7700
W system
66.4 - 79.2
lm source
8700 - 10000
W source
57 - 69
Luminous efficiency - lm/W (system value)
97.22
lm in emergency mode
-
Light output ratio (LOR)
77
Optic and beam angle
S - Spot 16°
Adjustability
rotation and tilt updown
Light colour quality
CRI (minimum) 80 - Rf (Colour Fidelity Index) 86 - Rg (Gamut Index) 96
Colour temperature
2700 K
MacAdam Step
3
Lifetime LED 1
100,000h - L90 - B10 (Ta 25°C)
Electrical data
Operating ambient temperature range
da -30°C a 35°C.
ZVEI code
LED
Power Supply
Electronic Power supply not included
Mounting options
Remote
Control
DALI-2
Installation
Description
Floor-installed or wall-mounted with a bracket or handle (special bracket).;
Wiring
A2 stainless steel cable gland.
Required accessories
To properly install and operate this product it’s necessary to have one of the required accessories
Go to required accessoriesNotes
IMPORTANT: see the instruction sheet for the minimum and maximum number of products per power supply.