X294

DMX control panel with glass front that controls RGB, RGBW, TW, Trick eᵐ DMX luminaires in Plug & Play mode. Using the software (programmable configuration), RGB, RGBW, TW and WHITE luminaires can be controlled and new shows programmed. It controls 512 channels for each of the 2 DMX lines available; it has an intuitive colour wheel, a display, touch areas for user-friendly scenes selection, intensity, colour and speed sequence adjustment. All the connected luminaires emit the same colour.
Scenes:
For RGB and RGBW luminaires (Plug & Play)
1. Red (steady)
2. Yellow (steady)
3. Green (steady)
4. Cyan (steady)
5. Blue (steady)
6. Magenta (steady)
7. RGB Fast (loop)
8. RGB Slow (loop)
9. RGBW Full (steady)
For RGBW luminaires (Plug & Play)
10. WhiteRGBW (steady)
11. RGBW Fast (loop)
12. RGBW Slow (loop)
For TW luminaires with 3 LED colour types (Plug & Play)
13. Warm-3ch (steady)
14. Neutral-3ch (steady)
15. Cool-3ch (steady)
16. WNCFast-3ch (loop)
17. WNCSlow-3ch (loop)
For TW luminaires with 2 LED colour types (Plug & Play)
18. Warm-2ch (steady)
19. Neutral-2ch (steady)
20. Cool-2ch (steady)
21. TWFast-2ch (loop)
22. TWSlow-2ch (loop)
For Trick eᵐ (Plug & Play)
23. Up Down (Dynamic loop)
24. Bounce (Dynamic loop)
25. Slow Wheel (Dynamic loop)
26. Fill & Back (Dynamic loop)
27. Half & Half (Dynamic loop)
28. Full ON (steady)
29. Pulse (Dynamic loop)
30. Fast Wheel (Dynamic loop)

Mounted on a box with drillholes at a centre-to-centre distance of 60 mm. Box item code ML15 available as an accessory.;

For special scenes where the luminaires do not emit the same colour (e.g. a rainbow effect) both the panel and the luminaires must be programmed with the software. Contact the company for this specific requirement.