X741
Colour
Technical Data
last update: 21/10/2025Description
Box with Bluetooth-DALI interface for Quick BLE system. Operates with the "iGuzzini Smart Light 2" app
Specific component for Class II systems.BR> Allows single and group checks and 32 DALI address broadcasts - Settable weekly schedulers: using a bridge for this function is mandatory - code ZQV4 (IP20) and a WiFi network for synchronisation.
Input voltage: 220-240 Vac, 50/60 Hz - High degree of surge protection, uses a dedicated SPD, 10 kV differential mode protection - Inrush current: 20 A - Consumption: 1 W (typical) ; 3 W (max in transmission) - Checks up to n. 32 DALI addresses - DT6/DT8 (TW) - DALI bus current: max 160 mA - Low Energy Bluetooth frequency: 2.4 GHz - BLE 5.2 - Transmission power: 8 dBm (max) - Operation in mesh network- Update via OTA (over the air) - Operating temperature: -20 +50 °C
Integrated Beacon that can be activated to enable smart services likePush Notification with Jiminy system - Available protocols: iBeacon, Eddystone, AltBeacon.
Specific component for Class II systems.BR> Allows single and group checks and 32 DALI address broadcasts - Settable weekly schedulers: using a bridge for this function is mandatory - code ZQV4 (IP20) and a WiFi network for synchronisation.
Input voltage: 220-240 Vac, 50/60 Hz - High degree of surge protection, uses a dedicated SPD, 10 kV differential mode protection - Inrush current: 20 A - Consumption: 1 W (typical) ; 3 W (max in transmission) - Checks up to n. 32 DALI addresses - DT6/DT8 (TW) - DALI bus current: max 160 mA - Low Energy Bluetooth frequency: 2.4 GHz - BLE 5.2 - Transmission power: 8 dBm (max) - Operation in mesh network- Update via OTA (over the air) - Operating temperature: -20 +50 °C
Integrated Beacon that can be activated to enable smart services likePush Notification with Jiminy system - Available protocols: iBeacon, Eddystone, AltBeacon.
Dimensions
General (mm)
289x115x66
Technical performance
Complies with EN60598-1 and pertinent regulations
Product certification
-
CE -
UK Conformity Assessed
Electrical data
Power Supply
Electronic Power supply included
Mounting options
Integral
Control
Bluetooth WiSilica
Installation
Description
The Box must be installed inside iGuzzini Connected Poles with twin access covers and a Ø159/194/219 mm base. It cannot be installed on unspecified poles.
To install it inside the pole, the X743 bracket (not included) must be used.
The box can also be used externally as a BLE-DALI check interface with a high degree of surge protection (an IP66 rating is obtained thanks to an antenna inside the box and a cap on the relative cable clamp).;
To install it inside the pole, the X743 bracket (not included) must be used.
The box can also be used externally as a BLE-DALI check interface with a high degree of surge protection (an IP66 rating is obtained thanks to an antenna inside the box and a cap on the relative cable clamp).;
Wiring
Box fitted with cable clamps:
- 1 PG16 for power supply input from below (cable: min 7-max 16 mm).
- 2 side PG13.5 for power supply output+DALI (cable: min 6-max 12 mm).
- 1 upper connector for BLE antenna output.
- 1 connector for connecting to the earth screw included on the pole.
The cable clamps are fitted with endcaps in case they are not used.
- 1 PG16 for power supply input from below (cable: min 7-max 16 mm).
- 2 side PG13.5 for power supply output+DALI (cable: min 6-max 12 mm).
- 1 upper connector for BLE antenna output.
- 1 connector for connecting to the earth screw included on the pole.
The cable clamps are fitted with endcaps in case they are not used.
Notes
Maximum radius of action between poles with boxes installed inside them:
- Connected Poles with standard access door: 25 m in a straight line with no obstacles.
- Connected Poles with access door fitted with a flush-mounted antenna: 50 m in a straight line with no obstacles.
Maximum radius of action between boxes used an external interface: 50 m in a straight line with no obstacles.
In all cases, the maximum distance is affected by the presence of physical obstacles, like concrete, brick or metal panel walls.
- Connected Poles with standard access door: 25 m in a straight line with no obstacles.
- Connected Poles with access door fitted with a flush-mounted antenna: 50 m in a straight line with no obstacles.
Maximum radius of action between boxes used an external interface: 50 m in a straight line with no obstacles.
In all cases, the maximum distance is affected by the presence of physical obstacles, like concrete, brick or metal panel walls.