.jpg)
X783
Colour
Technical Data
last update: 04/11/2025Description
Kit for Citygrid Gateway pole-installation consisting of a plastic base that is concave on one side and an 8 m long cable with an IP connector plus a safety locknut.
The Gateway (not included) is fixed to the base supplied in the Kit using 2 self-tapping screws (included).
The cable supplied with this Kit is a 2 conductor cable, that powers the Gateway and therefore does not allow an internal relay to be used.
The Gateway (not included) is fixed to the base supplied in the Kit using 2 self-tapping screws (included).
The cable supplied with this Kit is a 2 conductor cable, that powers the Gateway and therefore does not allow an internal relay to be used.
Dimensions
General (mm)
15x57x146
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Thermoplastic
Installation
Description
The base is fixed to the pole using 2 self-tapping screws (not included). A hole must be drilled in the pole to allow the cable and connector (that exit the rear of the Gateway) to pass through it.;
Wiring
The Kit’s cable and connector must be connected to the 220-240 Vac electrical network via two conductors (L-N).
Notes
Consult the pole manufacturer for more information about drilling and an eventual successive protection.