X020
Colour
Technical Data
last update: 18/12/2025Description
Constant current non-dimmable electronic power supply max 20 W. Input Vin=220÷240 Vac 50÷60 Hz.
Constant current output 250÷700 mA selectable with a DIP-SWITCH.
Product features include overvoltage protection, short circuit protection, overcurrent and overtemperature protection.
Constant current output 250÷700 mA selectable with a DIP-SWITCH.
Product features include overvoltage protection, short circuit protection, overcurrent and overtemperature protection.
Dimensions
General (mm)
110x52x22
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.2
Product certification
-
EAC
Electrical data
Maximum number of luminaires of this type per minature circuit breaker
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
B10A: 31 power supply units
B16A: 50 power supply units
C10A: 52 power supply units
C16A: 85 power supply units
Overvoltage protection
2kV Common mode & 1kV Differential mode
Inrush current
5 A / 50 µs
Frequency
0/50/60 Hz
Installation
Description
Positioned on top of or inside electrical boxes. Fitted with slots for fastening with screws, if required.;
Wiring
Input and output terminals on same side (cable cross-section up to 1.5 mm2).
Primary and secondary cable clamp for cables with a diameter of min. 3 mm - max. 8 mm.
Primary and secondary cable clamp for cables with a diameter of min. 3 mm - max. 8 mm.
Notes
To set the current and for the minimum and maximum quantities of luminaires that can be connected to this power supply, consult the reference product instruction sheet.
Compatible products
This accessory can be used with the following products